Din kurv er tom


Bas Arm On Tour
18/03 2019 kl. 14:03
I weekenden tog vi hul på Bas Arm On Tour i Ridehuset, ...
2 x elever på skole
11/03 2019 kl. 11:38
Både Oliver og Andreas er på skole lige nu: Andreas ...
Her går det godt! Solen skinner: Vi undlader at tænke ...

d&b Q1. NL4

400 DKK

(ex. moms)

Vejledende pris: 400 DKK
Leje pr. døgn.
På lager
Varenr.: 22
Vægt 22,00 kg.

Kabler til produktet

Bestil Varer Pris Note
Speakon NL4 kabel. 4POL
+ 5 DKK På lager

Forstærker til produktet

Bestil Varer Pris Note
d&b D12. NL4 & EP5
+ 375 DKK På lager
LAB PLM 10000Q
+ 500 DKK På lager


Bestil Varer Pris Note
d&b Q Flying adapter.
+ 80 DKK På lager
d&b Q Rigging set.
+ 40 DKK På lager
d&b Q Flying frame
+ 130 DKK På lager

Tilhørende sub

Bestil Varer Pris Note
d&b Q-sub. NL4
+ 250 DKK På lager

d&b Q1. NL4

EP5 Version

Q1 loudspeaker

The Q1 is a passive 2-way loudspeaker housing two 10" LF drivers positioned in a dipolar arrangement and a 1.3" HF compression driver fitted to a toroidal wave shaping device. The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wave front. The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0° and 14°. Q1 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to twenty cabinets with a fully user and venue defined vertical profile. The Q1 cabinet is constructed from marine plywood, incorporates a pair of handles and has an impact resistant paint finish. The front of the loudspeaker is protected by a rigid metal grill covered with replaceable acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.


The Q1 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q1. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.


Live music
Stage monitor  


Components 2 x 10" driver / 1.3" compression driver
Max. sound pressure (1m, free field) with D6 / D12 135 / 139 dB SPL
Power handling capacity (RMS / peak 10 ms) 400 / 1600 W
Frequency response (-5 dB) 60 / 100 Hz - 17 kHz
Nominal dispersion angle (h x v) 75° x 15°
Cabinets per channel D6 / D12 2 / 2
Dimensions mm (H x W x D) 308 x 580 x 410
Weight kg 22
Dimensions inch (H x W x D) 12.1 x 22.8 x 16.1
Weight lb 49


Application information is presented for guidance only. We reserve the right to make any necessary changes to the products and the published specification. As part of our ongoing product development program we try, where possible, to maintain the highest degree of product compatibility.


recommended use
with subwoofer
from 2 up to 20 as array
SPL max peak test signal: pink noise with crest factor 4
standard/CUT mode
≥ 400 Hz in dipolar direction
in applications with low continuous levels or low ambient temperatures up to three loudspeakers per channel D12 may be connected

Login Bruger

Husk log ind

Nyhedstilmelding (e-mail)

Spam tjek * (Indtast teksten der vises i billedet nedenfor.)

Tilmeld Afmeld