Din kurv er tom

Nyheder

Sommeren ´17 i backspejlet
14/09 2017 kl. 10:20
Er det allerede september?!? Hold nu op det gik stærkt! ...
Aarhus2017
02/01 2017 kl. 21:09
Aarhus og region midtjylland er valgt til Europæisk ...
Juli måned hos Soundwise
04/08 2016 kl. 10:56
Så er festivalsæsonen i gang! Lars lagde ud med ...

CMS 503DC BM, Tannoy

CMS er et kompakt og meget vellydende højttalersystem til loftsinstallationer. 

1.740 DKK

(ex. moms)

Vejledende pris: 1.740 DKK
På lager
Varenr.: CMS503DCBM
Vægt 0,00 kg.

CMS 503DC BM, Tannoy

Based on an all-new evolution of Tannoy’s proprietary Dual Concentric point-source driver, the CMS 503DC BM has been fundamentally re-engineered to deliver wider and more consistent broadband directivity, even greater intelligibility, and a more accurate and linear response.

The new Dual Concentric driver design features revolutionary Omnimagnet™ technology and unique patent-pending Torus Ogive Waveguide™ device, together providing more consistent and controlled directivity along with improved high frequency response. Improved time-alignment and greater coherence between LF and HF results in a wider sweet spot for enhanced performance both onand off-axis. The re-designed baffle provides a subtle extension to the waveguide effect for additional sonic benefits.

The CMS 503DC BM also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-screwing. Magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes with grilles now available as either traditional style (inset in bezel) or new Arco™ style which conceals the entire unit for more architectfriendly aesthetic appeal.

The CMS 503DC utilizes a 16 ohm driver, making it ideal for use in high performance low-impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). A low-insertion loss 30 W transformer is included, with convenient front bezel switching for taps at 30 W, 15 W and 7.5 W, with an additional 3.75 W tap for traditional constant voltage systems.

The CMS 503DC BM is supplied with an integral zinc plated steel back-can, ready to install as a single unit and feature an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. Strain relief is provided by a clamping mechanism for use with plenum-rated cable or conduit, while new spring-loaded and self-aligning clamps make for even quicker and easier installation. All models are supplied with classic grille, two tile support rails and one C-ring; Arco grille and plaster (mud) ring are available as optional accessories.

TECH SPEC OVERVIEW

  • Advanced new Dual Concentric driver design utilizing Omnimagnet technology
  • Torus Ogive Waveguide device for improved broadband directivity
  • Tight, uniform 90-degree dispersion pattern for high-ceiling applications
  • Improved time alignment and phase coherence, delivering even better sonic performance
  • High power and high sensitivity with extended frequency response and very low distortion
  • Improved LF performance for applications where genuine bottom-end is a must
  • Low insertion-loss, 30 watt line transformer for a more powerful and dynamic performance
  • Convenient front-tapping switch for settings
  • Magnetically-adhering grille system for easy custom painting and optional Arco designer grilles for minimal architectural impact
  • Three-clamp, self-aligning mounting system
  • UV resistant baffle and grille
  • Packaged with classic grille, tile rails and C-ring for quick and easy installation and simple stocking logistics
  • Læs mere. http://www.tannoypro.com/products/series/cms-3-0/cms-503dc-bm/model-overview

Login Bruger

Husk log ind

Nyhedstilmelding (e-mail)


Tilmeld Afmeld